Cheppudira Thimmaiah, Poovanna - Development of capillary-assisted low pressure evaporator for adsorption chillers...

This thesis has been submitted to the Library for purposes of graduation, but needs to be audited for technical details related to publication in order to be approved for inclusion in the Library collection.
Publication of this thesis has been postponed at the author's request until 2019-06-18.
Summer 2018
Degree type: 
School of Mechatronic Systems Engineering
Applied Sciences
Senior supervisor: 
Majid Bahrami
Publishing Documentation
Postponement release date: 
Tue, 2019-06-18
Thesis title: 
Development of capillary-assisted low pressure evaporator for adsorption chillers
Given Names: 
Cheppudira Thimmaiah
The sales of air conditioners are poised to intensely increase over the next several years as incomes and global temperatures rise around the world. Conventional air conditioning systems use vapor-compression refrigeration (VCR) technology that has been the dominant technology for close to a century. However, the environmental impact of VCR systems, particularly their high energy consumption, around 36% of energy consumed in the US building sector, is contrary to sustainable development. In addition to the residential sector, VCR systems for vehicle air conditioning (A/C) applications can cause a 20% increase in fuel consumption. Moreover, while the commonly used refrigerants in VCR systems, hydrofluorocarbons (HFCs), are ozone-friendly, they still contribute to global warming. Alternative, natural refrigerants, such as water, have no toxicity and significantly lower global warming potential compared to HFCs. Furthermore, water is an ideal refrigerant for systems driven by low-grade thermal energy. Solar-thermal and waste-heat from industrial facilities and data centers are all abundant sources of low-grade thermal energy, with a temperature less than 100°C. Low-grade thermal energy can be used to run adsorption chillers for air conditioning of vehicle cabins and residential units. When using water as an air conditioning refrigerant, evaporation occurs at pressures below an atmosphere. In such a low pressure (LP) environment, the performance of a flooded evaporator is negatively affected by the hydrostatic pressure. This problem can be resolved by using a capillary-assisted low-pressure evaporator (CALPE) that exploits thin film evaporation. The focus of this doctoral research is to develop an effective CALPE for proof-of-concept demonstration of an adsorption chiller for vehicle A/C applications. In this research, a low pressure evaporator testbed is designed and built for the first time at Laboratory for Alternative Energy Conversion (LAEC) to test CALPE. In addition, a mathematical model is developed to understand detailed phenomena in capillary-assisted evaporation and to provide insight to design an effective and compact CALPE. Several commercial tubes with different fin geometries are tested. The results show that the capillary-assisted tubes provide two times greater heat transfer rate compared to a plain tube. To further enhance the performance, the outside surfaces of CALPE are coated with a thin film of porous copper to increase the capillary action and the surface area available for thin film evaporation. The coating increased the overall heat transfer coefficient by 30%. However, a significant amount of the thermal resistance is from the inside of the evaporator tubes. Therefore, a new µCALPE is designed with microchannels on the inside and rough capillary channels on the outside is 3D printed by using direct metal laser sintering process. The internal microchannels and external capillary channels led to enhanced heat transfer both internally and externally. The µCALPE increased the overall heat transfer coefficient by a factor of 2.5 when compared to the CALPE built with commercial Turbo Chil-40 FPI tubes, which had footprint of four times larger than that of µCALPE. The developed µCALPE is expandable to the entire low-grade thermal energy driven A/C systems in vehicles as well as residential units.
Adsorption chiller; Flooded evaporator; Capillary; Evaporation; Thermal resistance; Copper coating
Total pages: